An Ellingham diagram tracks the Gibbs free energy of oxide formation as temperature changes. Learn how line position and slope reveal oxide stability and help predict when carbon or another metal can reduce an oxide—a useful link between thermodynamics and welding metallurgy.

Multiple Choice

The plot of free energy of oxide formation is known as the:

The concept being tested is recognizing that the plot showing the standard Gibbs free energy change for oxide formation as a function of temperature is called an Ellingham diagram. In this diagram, each line represents a metal oxide forming from the metal and half a molecule of oxygen. The lower the line, the more stable the oxide is under those conditions. Since oxide formation usually has a negative entropy change, these lines typically slope upward with increasing temperature, meaning oxide formation becomes less favorable as temperature rises. This diagram is used to gauge which oxides are stable and to predict reducibility: by comparing lines, you can tell at which temperatures a reducing agent (like carbon or another metal) can reduce a given oxide, because reduction is favorable when the reducing agent’s line lies below the oxide’s line on the diagram. Other diagrams mentioned serve different purposes (Pourbaix for aqueous stability vs pH and potential, Phase diagrams for phases by composition and temperature, etc.), so they don’t specifically depict the free energy of oxide formation.

Ellingham Diagrams: Reading the Thermodynamics of Oxide Formation

When steel heats up during welding, oxygen can react with metal and form oxides. The same reaction shapes processes such as smelting, refining, and heat treatment. To compare how readily different metals form oxides—and how easily those oxides can be reduced—metallurgists use an Ellingham diagram. It plots the standard Gibbs free energy change for oxide formation against temperature, turning a set of chemical reactions into a useful visual map.

The name matters because several diagrams appear in materials science, but they answer different questions. An Ellingham diagram focuses on the thermodynamic stability of oxides. A Pourbaix diagram maps the stable forms of a material in water as pH and electrical potential change. A phase diagram shows which phases are stable at different temperatures and compositions. Useful tools, all—but not interchangeable.

What the lines actually represent

Each line on an Ellingham diagram describes a reaction in which a metal combines with oxygen to form an oxide. A simplified example is:

[

2M + O_2 \rightarrow 2MO

]

Here, (M) stands for a metal. Actual reactions depend on the metal and the oxide involved, and diagrams may write them with different amounts of material. For fair comparison, the free energy change is usually expressed per mole of oxygen, or per mole of (O_2).

The vertical axis shows the standard Gibbs free energy change, (\Delta G^\circ), while the horizontal axis shows temperature. A lower line means oxide formation has a more negative free energy change under the stated standard conditions. In plain language, the oxide is more stable relative to the metal and oxygen.

That doesn’t mean the metal must instantly oxidize in every setting. Thermodynamic stability tells us which state is favored, not how fast a reaction will happen. A protective film, limited oxygen supply, or slow diffusion can hold a reaction back. This distinction between what can happen and how quickly it happens is central to metallurgy.

Why the lines slope upward

The shape of an Ellingham diagram comes from the Gibbs free energy equation:

[

\Delta G^\circ = \Delta H^\circ - T\Delta S^\circ

]

In this equation, (\Delta H^\circ) is the standard enthalpy change, (T) is temperature, and (\Delta S^\circ) is the standard entropy change. Over a temperature range where these values don’t shift too sharply, a plot of (\Delta G^\circ) against temperature is close to a straight line. Its slope is related to (-\Delta S^\circ).

For oxide formation, oxygen gas is often consumed and bound into a solid oxide. That usually reduces the number of freely moving gas molecules, so the reaction’s entropy change is often negative. When (\Delta S^\circ) is negative, the term (-T\Delta S^\circ) becomes more positive as temperature rises. The line therefore tends to slope upward.

The practical meaning is worth pausing over: oxide formation often becomes less thermodynamically favorable at higher temperatures. “Less favorable” doesn’t necessarily mean impossible, and some reactions have more complex behavior. But the upward trend gives readers a strong first clue.

Comparing lines reveals reduction potential

The real strength of the diagram appears when two lines are compared. Suppose one line represents the formation of a metal oxide, while another represents the formation of a reducing agent’s oxide. If the reducing agent has a stronger tendency to bind with oxygen, its oxide-formation line will sit lower at that temperature.

A reducing agent can then take oxygen away from another oxide, provided the overall reaction has a negative Gibbs free energy change. On the graph, this is commonly assessed by comparing the relevant lines. If the line for forming the reducing agent’s oxide lies below the line for the oxide being reduced, the reduction is thermodynamically favorable under the diagram’s assumptions.

Carbon is a familiar example in metal production. At different temperatures, carbon can form carbon monoxide or carbon dioxide, and those reactions have their own lines. Where a carbon-oxidation line lies relative to a metal-oxide line helps indicate whether carbon can reduce that oxide at that temperature. The diagram doesn’t replace reaction calculations, but it quickly shows where a reaction may become feasible.

Line crossings are especially useful. A crossing marks a temperature range where the relative stability of two oxides changes. Above or below that point, one oxide may be more stable than the other. In some cases, this shift explains why a reducing agent works only once the process reaches a certain temperature.

A map, not a complete process recipe

Ellingham diagrams are powerful, but they have boundaries. Most standard diagrams assume standard states, such as gases at a reference pressure and pure condensed substances with unit activity. Real furnaces contain changing gas mixtures, impurities, and surfaces that may not behave ideally.

Gas pressure can also matter. The oxygen partial pressure in a furnace affects whether a metal or oxide is favored. The diagram can help estimate this relationship, but readers need to account for the actual conditions. A very low oxygen level may allow a metal to remain stable even when the standard-state picture suggests oxidation is favorable.

Kinetics matter too. A reaction can be thermodynamically favorable yet proceed slowly because atoms must diffuse through a solid layer or cross an energy barrier. Some oxides form dense, adherent films that slow further oxidation. Others crack or flake away, exposing fresh metal. That’s one reason aluminum behaves differently from iron in air: its oxide film can be highly protective, even though the detailed behavior depends on temperature and environment.

So the diagram answers a focused question: Which reaction is thermodynamically favored at this temperature, under the stated conditions? It doesn’t tell the whole story about reaction speed, oxide structure, or the quality of a weld.

Why this matters in welding and metalworking

Welding brings high temperatures and reactive surfaces together. If oxygen reaches hot metal, oxide formation can affect surface condition and, depending on the process and material, the quality of the joint. Shielding gases help limit exposure to the surrounding atmosphere. Fluxes can also help manage oxides by promoting their removal or preventing them from interfering with the molten metal.

An Ellingham diagram gives metallurgists a way to think through the chemistry behind such choices. It helps explain why certain elements readily form oxides, why some oxides are difficult to reduce, and why a change in temperature can shift the balance. That perspective is useful well beyond welding: it also underpins decisions in extraction, refining, furnace design, and the control of oxidation during heat treatment.

For Canadian Welding Bureau Level 3 study, the key is to connect the diagram to the underlying thermodynamics rather than memorize its name alone. The lower line indicates the more stable oxide; the slope reflects entropy effects; and line comparisons help assess whether a reducing agent can remove oxygen from an oxide.

Keep the diagram’s job clear

Ellingham diagrams are sometimes confused with other materials-science charts because they all use lines and axes. The quickest way to tell them apart is to ask what they track. If the subject is oxide formation and standard Gibbs free energy versus temperature, it’s an Ellingham diagram. If the chart concerns phases and composition, think phase diagram. If it concerns aqueous stability against pH and electrical potential, think Pourbaix diagram.

That simple distinction carries a lot of weight. An Ellingham diagram turns the competition for oxygen into a visual comparison, showing how temperature can change the balance. Once its lines are read in that way, the chart becomes more than a collection of slopes—it becomes a compact guide to the thermodynamics of metals and their oxides.